What is the operating method of a road cutting machine? Let you use it correctly

There are various devices in our lives, what is the operation method of the road cutter? In order to help everyone master the correct usage method, the content shared next is enough to answer everyone's doubts. Let's take a look at the relevant content below.

1. Road cutting machine

Tools for road maintenance and construction. Its main function is to cut the joints of the road surface. The depth can reach thin lines ranging from 100mm to 400mm. Commonly used on cement and asphalt roads! Normal construction requires a certain level of proficiency to operate the machine!

2. Operation method of road cutting machine

1、 Preparation before cutting

(1) Before use, the performance of the equipment must be carefully checked to ensure the integrity of all components.

(2) Check the power switch, saw blade tightness, saw blade protective cover or safety baffle in detail. The operating table should be stable, and there should be sufficient lighting brightness for night work.

(3) Before use, first turn on the main switch, turn it around without load, confirm safety and error, and then turn it on.

(4) Before operation, it is necessary to check whether the power supply matches the rated 220VA voltage specified on the electric tool to avoid mistakenly connecting to the 380VA power supply.

2、 Cutting precautions

(1) When the cutting machine is working, it is necessary to be fully focused, maintain a clear mind, and operate electric tools reasonably. It is strictly prohibited to operate the cutting machine after fatigue, drinking alcohol, or taking stimulants or drugs.

(2) The power cord must be safe and reliable, and unauthorized pulling is strictly prohibited. Be careful not to cut off the power cord. Before use, the performance of the equipment must be carefully checked to ensure that all components are in good condition.

(3) Wear suitable work clothes. Do not wear loose work clothes, let alone jewelry or long hair. It is strictly prohibited to wear gloves or operate without cuffs buckled.

(4) The workpiece being processed must be clamped, and cutting is strictly prohibited when the workpiece is not clamped.

(5) It is strictly prohibited to grind burrs on the grinding wheel surface to prevent the grinding wheel from breaking.

(6) When cutting, the operator must deviate from the front of the grinding wheel and wear protective glasses.

(7) It is strictly prohibited to use damaged grinding wheels. When cutting, prevent sparks from splashing and stay away from flammable and explosive materials.

(8) When clamping the workpiece, the clamping should be stable and firm, and the protective cover must be installed correctly. After clamping, the machine should be turned on and checked for dry operation, without any shaking or abnormal noise.

(9) When replacing the intermediate saw blade or grinding wheel with a new one, do not use excessive force on the locking nut to prevent accidents caused by the breakage of the saw blade or grinding wheel.

(10) To firmly grasp the handle of the cutting machine, evenly and vertically cut with force, the fixed end must be firm and reliable.

(11) Do not attempt to cut small unclamped workpieces or profiles with severe edges and corners.

(12) In order to improve work efficiency. Before sawing single or multiple pieces, it is necessary to do a good job of auxiliary clamping and positioning.

(13) Do not perform strong sawing operations, wait for the motor speed to reach full speed before cutting. (14) No one is allowed to stand behind the chainsaw. When there is a power outage, resting, or leaving the work site, the power should be immediately cut off.

(15) When the saw blade is not stopped, do not release your hand or lift your arm away from the saw blade or workpiece.

(16) Do not operate when the protective cover is not in place, and do not place your hands within 15 centimeters of the saw blade. Do not bend over or bypass the saw machine. It is advisable to tilt your body at a 45 degree angle during operation.

(17) If there is any abnormal noise, the inspection should be stopped immediately; Before repairing or replacing accessories, the power must be cut off and the saw blade must be completely stopped.

(18) When using a cutting machine to work in damp areas, it must be done on an insulating mat or dry wooden board. Protective measures must be taken when climbing or using in hazardous areas such as explosion-proof areas.

(19) If the equipment experiences shaking or other malfunctions, it should be immediately shut down for maintenance. It is strictly prohibited to work with illness, take stimulants, and drink alcohol, and to wear gloves during operation. If dust is generated during operation, please wear a mask or face mask.

(20) After processing, the power should be turned off and the equipment and surrounding area should be cleaned.

What is the operating method of a road cutting machine? I believe that after reading the above content, everyone has a comprehensive understanding of how to use it. I hope everyone likes the above content.